GSM & CDMA Repeater

GSM Cell Phone Signal Booster

Approx Price: Rs 11,500 / Unit 

Backed by a team of skilled professionals, we are actively engaged in providing Gsm Cell Phone Signal Booster. Our offered repeater is valued for its operational fluency and compact design. We develop this repeater using advance technology & quality tested material. Additionally, this repeater is quality tested on numerous parameters to provide flawless range.

Features:

  • Superior performance
  • Longevity
  • Sturdy design

Specification:

Model NoKW33F-GSM
Parameter dataUplinkDownlink
Frequency RangeUL:890-915mhzDL:935-960mhz
Output Power30 ±2dBm33 ±2dBm
Gain80dB85 dB
Bandwidth25M
Automatic Gain Control≥ 20 dB
Ripple in Band≤4dB
Intermodulation Products9KHz~1GHz≤ -36 dBm
1GHz~12.75GHz≤ -30 dBm
Spurious Emission9KHz~1GHz≤ -36 dBm
1GHz~12.75GHz≤ -30 dBm
Noise Figure @ max. gain≤ 6 dB
VSWR≤2
MTBF>50000 hours
Power SupplyAC:100~240V, 50/ 60Hz;DC:9V 3A
Power Consumption< 15W
Impedance50 ohm
Mechanical Specification
RF ConnectorN-Female
CoolingHeatsink Convection cooling
Dimensions (D x W xH )270*170*60 mm
Weight3.5Kg

GSM 850 Signal Booster

Approx Price: Rs 11,500 / Unit 

Specifications:

Parameter dataUplinkDownlink
Frequency Rangecdma824~849MHz869~894MHz
Output Power17 ±2dBm20 ±2dBm
Gain65 ± 2 dB70 ± 2 dB
Bandwidth25M
Ripple in Band≤6dB
Spurious Emission9KHz~1GHz≤ -36 dBm
1GHz~12.75GHz≤ -30 dBm
Noise Figure @ max. gain≤ 6 dB
VSWR≤3
MTBF>50000 hours
Power SupplyAC:100~240V, 50/ 60Hz;DC:5V 1A
Power Comsumption< 5W
Impedance50 ohm
Mechanical Specification
RF ConnectorN-Female N
CoolingHeatsink Convection cooling
Dimensions (D x W xH )200*110*25 (mm)
Weight1Kg
Installation TypeWall Installation
Environment ConditionsIP40
Humidity< 90%
Operating Temperature-10°C ~ 55°C

 

How should you install repeater (very easy and simple):

 

  • Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
  • Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
  • Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
  • Step 4: Mount your indoor antenna with signal repeater
  • Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

 

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. Indoor and outdoor antenna must be separated by wall.

Looking for GSM & CDMA Repeater ?
© Dolphin Automation & Technology
 
Desktop Site Back to top